Installation Procedure for ArtRM for Petrol Pump:
If you have a Installation CD of the ArtRMPP software then just insert the CD in CD Drive and locate the Package Folder. Open Package folder by double clicking. Inside the Package folder Setup application (setup.exe) is available. Just double click on Setup.exe to start installation of the Software and follow the instruction as given below:
If you do not have the Quicksoft Software Installation CD then you may Download all the zip files as shown below from the Quicksoft website page :
a) Setup
b) Software
c) Rreports
d) Users Manual
in a New Folder on Desktop.
Select the Zip file from which you wish to extract file
Click Right Mouse Button on the selected zip file
and Extract the File by clicking the “Extract to here” as shown below:
Extract File
Extract the Setup.exe from the Package.zip and execute the setup file by
- Double Clicking On the “Setup.Exe”
and The Installation Will Start . . . . .
File Copy Status
2. Please wait for few minutes, while it is copying the necessary files…
3. Select OK To Proceed Further.
Confirm Installation
When you Press OK in the above screen, The Following Screen will appear. This is to allow you to Install the software at the location other than default location. In Case, when the User wish to change the Path then he/she can do so by Clicking On the Change Directory Button. To Continue setup Press the Computer Icon / Setup button displayed on the top-left corner of the screen to proceed.
Specify Installation Directory
8. Then Following screen will appear to allow you to select the Program Group under which the shortcut is to be created or create new program group. Press Continue For Further Installation.
Quicksoft Program Group
9. Click “Yes” button whenever you are asked to confirm “Do you want to keep the File?” or similar message as shown in below given screen.
Version Conflict - Keep File
On some PC’s, you will be asked to confirm for about 8-10 times.
9. At any stage of Installation, if you see any message like problems registering file with the computer (for e.g. MSADO21.TLB), as shown below then just Ignore them to continue the Installation. On Clicking Abort Button Installation Will be aborted, Retry Button if Clicked, will Again try to register the same file again, and if it fails again, the same message will Appear On The Screen Again, Therefore it is suggested to Click On Ignore to Proceed Further.
- Ignore the Error
10. At the end the software will display the message “Installation Completed Successfully!” if the installation is completely successful.
Reports: –
Steps to install Reports
Step 1: – Copy the Reports.zip file to the ArtRM Folder.
The folder where you have installed the software
E.g. By default Path: – “C:\Program Files\ArtRm”
Then extract the file as shown below:
Extract Reports
Extracting by Clicking on Extract to here will extract all the “.rpt” (report) files into the Reports Folder. Which means it will first create the Reports folder and then extract all the “.rpt” files in the Reports folder.
After copying the Report files only, you will be able to view Reports.
Please note that we frequently update the Software for incorporating the new updates and new features.
Users are advised to regularly visit the www.quicksoftservices.com/download page and check for availability of new updates. The download page displayed the date of update as shown below:
Software Update
To Update the software to newer version, all you need to do is just download the Software by downloading the Software (ArtRMPP.zip) 3.77MB as shown above.
After downloading the ArtRMPP.zip (software), extract the ArtRM.exe file and just Replace it with the existing version in C:\Program Files\ArtRM folder.
Before downloading the updated version of the software from the website, always make sure, you rename the existing version of the software in use to some different name than ArtRM.exe. This is very important because, in the event of partial file download or download fails due to crc check-error or any other reason, if by chance you overwrite the new version with corrupted copy then you will loose the working copy, therefore it is always advised to first rename the working copy or move it to the safe place to restore it back in the event of download copy not usable.
As such, we make sure that the uploaded copy is free of bug, but if by chance the new copy is having bug and you overwrite by mistake then you need to continue working with previous version and therefore it is always advisable to have last working copy in safe place.
Installation creates the Short-cut of the Software in Programs Menu
Click on Start->Programs->Quicksoft->ArtRMPP to start the software
or
Start Software by Clicking on the ArtRM.exe in C:\Program Files\ArtRM folder.
Create Short-cut on Desktop
Locate the ArtRM.exe in C:\Program Files\ArtRM Folder, right-click on the ArtRM.exe and Send to Desktop to create the shortcut of the ArtRM application on your desktop.
The Default username and password is as follows:
username: admin
password: sa (case sensitive, small letters)
You may change the default password “sa” by clicking on the “Change Password” in Administration Menu.
BACKUP
It is strongly recommended to take back-up of the existing working software version before replacing the downloaded version, because it is quite possible that after replacing the new version, if due to download error or CRC error writing the file or due to any reason if the new version does not work then you can always continue working by restoring back the last working copy of software version (which is possible only if you have taken the back-up)
If disk space is not a constraint then it is strongly advised to set back-option to Advanced in the Administration->Configuration Screen so as to take back-up of every session. With Advanced Back-up option, software takes back-up of every session with date and time stamp added in the file name. The Back-up file is created in the Backup->Year->Month->Date (Date folder inside the Month folder inside the year folder). The Advantage of advanced backup option is allowing user to create different restore points and also UNDO the last bulk invoice generation, deletion or data-entry in the given session by restoring the database of particular restore point.
In fact, we strongly recommend to take back-up of entire ArtRM folder on CD, every month and Back-up of Database on daily basis to Pen-Drive or CD-Drive.
Downloading Reports:
Similarly, you can also download the Reports.zip for new updated reports. Again make sure you take back-up of your reports folder, because it may be possible that we might change reports to suit your requirement, or our engineer might have done some changes to reports on-site at your office and if you download the reports from the net it may so happen that those changes which were done specifically for you may get overwritten with the download, therefore it is strongly recommended to take back-up of Reports folder also.
Filed under: Software Installation | Tagged: ArtRMPP, Back-up, backup, copy, corrupted, data backup, Download, Installation Procedure, last working copy, new version, overwrite, Quicksoft, Quicksoft Services, replace, Reports, restore, restore point, Setup, Software, update, users manual, winrar, winzip | Leave a comment »
Quicksoft ArtRM Petrolpump Blog 